Adventure Trailers- Home Builder Parts

HOME BUILDER PARTS


AT Air Spring Mount
	Upper Air Spring Mount; We ended up designing and fabricating our own mounts after stock mounts failed under the stress of overland travel. AT increased the thickness of the steel, and re-designed the gussets. We tested them extensively and use them on all of our trailers. The spring mounts are weld on, or bolt on, made from 1/4" steel. The mounts are bare metal and need coating. Cost: $28.90 each

AT Shock mount
	We needed something beefier for our "Air-over" suspension system, so we fabricated 3/16" shock mounts. If your going to spend the time and money, you may as well do it right the first time. Weld or bolt on. Bare metal needs coating. Cost: $6.50 each

Firestone Air Spring
	The lowest maintenance air bag on the market. Gives a 5.5" - 6.5" ride height. Firestone #6781 is the industry standard for overland trailers. Cost; $109.00 each

High quality LED Lights;

	LED Oval Surface Mount Stop/Tail/Turn Light Completely Sealed 12 volt DC 0.14 amps 9 LED's 2 Hole Surface Mount Ply-Carbonate Lens & Housing Rated 100,000 hour life 7.8" W x 3.3" H Cost: $15.99

	LED Oval Surface Mount Reverse Light Completely Sealed 12 volt DC 18 LED's 2 Hole Surface Mount Ply-Carbonate Lens & Housing Rated 100,000 hour life 7.8" W x 3.3" H Cost: $44.99

	Submersible Combination Light Meets DOT requirements for Stop, Turn, Tail (12 LED). Side and rear reflector Side Marker (4 LED) License Plate (5 LED) 8-14Volt 4 9/16 X 4 9/16 X 2 7/8 W/O License Illuminator Cost: $21.06 With License Illuminator Cost: $24.90 Mounting bracket Submersible combo, black Cost: $3.86 Plastic License Bracket for Submersible combo. 9 X 4 31/32 Cost: $4.50

	3/4” Recessed Clearance light / Marker Light Miniature size and low profile reduces damage Urethane filled body for moisture protection Shock and vibration proof Installed in 3/4" hole 12VDC 0.06 amps Exceeds FMVSS 108 100,000 hour life Amber kit Cost: $6.30 Red kit Cost: $6.30

	Interior Low Profile LED A surface mounted replacement for a 40 Watt Halogen light. The lamp incorporates a fully-potted circuit board to prevent corrosion from salt water and harsh environments. Switch able between white and red light (don't lose your night vision) 450 lumens at less than 10 watts of power 12 volt DC 0.65 amps Natural white light, switch able to red light Diffuse lens for 180 degree output Rated for 50,000 hours Tough Black Polymer housing 50,000 hour life Highest lumens per watt LED, combined with easy surface mounting, epoxy sealed electronics. Cost: $112.54

	LED License Plate Light SAE & DOT rated Efficient lens Single piece waterproof construction Installed in 3/4" hole 12VDC 0.03 amps Tough Black Polymer housing 50,000 hour life Fixture projects 2" from the mounting plane to meet DOT requirements. Cost: $7.95

	Reflectors; self adhesive and flexible Amber Cost: $2.00 Red Cost: $2.00

BIRCH DRAWERS
	For the home builder AT offers the same drawer system made from Baltic Birch. Ready to assemble these drawers need to be finished either with polyurethane, paint, Linex, or a coating of your choice. These units are overbuilt to handle rough roads, and held together with strong fasteners and glue. With a little more work on your end you can enjoy cost savings of up to 50%. For our Composite Drawer System click here.

	"BIRCH 24-A" Outside Box 20" wide x 8.75" high x 24.0" deep Inner Drawer 15.5" wide x 6.25" high x 21.5" deep Weight approx; 45 lbs Cost $ 282.00 "BIRCH 24-B" Outside Box 20" wide x 12.0" high x 24.0" deep Inner Drawer 15.5" wide x 9.5" high x 21.5" deep Weight approx; 53 lbs Cost $295.00 Flat packed for shipping, assembly required. Fitment hardware supplied.

	"BIRCH 36-A" Outside Box 20" wide x 8.75" high x 36.0" deep Inner Drawer 15.5" wide x 6.25" high x 33.5" deep Weight approx; 58 lbs Cost $ 303.00 "BIRCH 36-B" Outside Box 20" wide x 12.0" high x 36.0" deep Inner Drawer 15.5" wide x 9.5" high x 33.5" deep Weight approx; 68 lbs Cost $ 320.00 Flat packed for shipping, assembly required. Fitment hardware supplied.

SUSPENSION UPGRADES
	The upgrades are for the TASS Generation 1 & Generation 2 suspension systems, and the earlier Horizon's fitted with Torsion axles. How do you know which suspension you have? If you have air bags, you have a TASS Generation 1 or 2 suspension. If you have a Horizon, and you do not have air suspension, you have a Torsion axle. For more in depth information read the Suspension Article here.

	FULL TASS SUSPENSION UPGRADE: This upgrade reduces the amount of body roll the trailer experiences by limiting the movement using bump stops and limiting straps. It's very effective and immediately noticeable once you have them fitted. In conjunction with the bump stops and limiting straps we recommend a retrofitting with custom valved Fox 2.0 race shocks. These shock absorbers improve the rebound and dampening compression. A bolt in cross member changes the shock position to a steeper more optimum angle.

	FULL UPGRADE FOR HORIZON TRAILERS: Fitted at the AT Facility: Cost: $1162.00 Home install Kit form: Cost: $805.58 (involves welding the limit stop tabs to the trailing arm and chassis).

	FULL UPGRADE FOR CHASER TRAILERS: This process is more involved. The existing chassis cross member has to be removed to allow for the placement of the new bolt in cross member. We only do this conversion "in house". Full Chaser Upgrade: Cost: $1447.00

	BASIC TASS Suspension Upgrade: This upgrade reduces the amount of body roll the trailer experiences by limiting the movement using bump stops and limiting straps. It's very effective and immediately noticeable once you have them fitted.

	BASIC UPGRADE FOR CHASER & HORIZON TRAILERS: Including bump stops, limiting straps and tabs. Fitted by AT: Cost: $328.00 Home install Kit form: Cost: $138.00 (involves welding the limit stop tabs to the trailing arm).

	TORSION FLEX AXLES: There solution to improve the performance of this axle is more complex. The axle and brackets must be removed and a new suspension system installed. We use our adjustable trailing arm suspension, and offer you the choice of air/over shocks, or coil/over shocks. All of our Torsion Flex axle replacements are done at our facility in Upland, CA. Air suspension replacement starts out around $2000.00. Call us to discuss the details.