drawer systems |
|
|
| |
|
|
| |
|
| COMPOSITE DRAWERS |
|
 |
Looking for a strong lightweight drawer system? AT has it for you.
Designed by a cabinet maker and seasoned Expedition Leader, this system holds up to the strains of extended travel with the feel of a well-made cabinet.
The Drawer System is designed and constructed for strength and to be lightweight. We didn't forget to make them functional, and good looking. |
| |
|
Light Weight; The Drawer System is made from a light weight composite board. Our 20' x 8.75" x 36" box finished with a tough urethane coating is 38 lbs. The AT system is a 1/3 rd the weight of similar products.
Strength; The composite board is tough, really tough. In the testing process we beat it with a sledge hammer and drove vehicles over it.
The drawer system is made from 3/4" material. The components are held together by a combination of hardware and adhesive, producing an extremely strong box. |
| |
 |
Quality hardware; We use high end slides for all of our drawers. The slides are rated well over the drawer's maximum weight capacity, using high quality ball bearings. Made by a top company they will offer years of trouble-free service. Couple the slides with low profile lockable latches and you have an outstanding product.
|
| |
|
| |
Drawer sizes: |
 |
Width; All of our drawers are 20 inches wide, they can be paired to form a double drawers of 40 inches total width.
Height: We offer drawers in two heights 8.75 inches, and 12 inches. You can stack the drawers in any number of combinations to get a custom fit for your vehicle.
Depth; The drawers are offered in two depths, 24 inches, and 36 inches.
You can stack drawers of different depths on top of each other. For example a 36 inch base unit could have 24" deep drawer units stacked on it. Drawer units are connected together using provided hardware
All sizes are measured on the exterior of the box. |
| |
|
| |
24" Deep Drawers: |
|
"24-A"
Outside Box 20" wide x 8.75" high x 24.0" deep
Inner Drawer 15.5" wide x 6.25" high x 21.5" deep
Weight approx; 31 lbs
Cost $ 425.00
"24-B"
Outside Box 20" wide x 12.0" high x 24.0" deep
Inner Drawer 15.5" wide x 9.5" high x 21.5" deep
Weight approx; 35 lbs
Cost $ 459.00
Flat packed for shipping, assembly required.
Fitment hardware supplied. |
| |
|
| |
36" Deep Drawers: |
|
"36-A"
Outside Box 20" wide x 8.75" high x 36.0" deep
Inner Drawer 15.5" wide x 6.25" high x 33.5" deep
Weight approx; 39 lbs
Cost $ 483.00
"36-B"
Outside Box 20" wide x 12.0" high x 36.0" deep
Inner Drawer 15.5" wide x 9.5" high x 33.5" deep
Weight approx; 45 lbs
Cost $ 530.00
Flat packed for shipping, assembly required.
Fitment hardware supplied. |
| |
|
| BIRCH DRAWERS |
|
 |
For the home builder AT offers the same drawer system made from Baltic Birch. Ready to assemble these drawers need to be finished either with polyurethane, paint, Linex, or a coating of your choice.
These units are overbuilt to handle rough roads, and held together with strong fasteners and glue.
With a little more work on your end you can enjoy cost savings of up to 50%. |
| |
|
 |
"BIRCH 24-A"
Outside Box 20" wide x 8.75" high x 24.0" deep
Inner Drawer 15.5" wide x 6.25" high x 21.5" deep
Weight approx; 45 lbs
Cost $ 282.00
"BIRCH 24-B"
Outside Box 20" wide x 12.0" high x 24.0" deep
Inner Drawer 15.5" wide x 9.5" high x 21.5" deep
Weight approx; 53 lbs
Cost $295.00
Flat packed for shipping, assembly required.
Fitment hardware supplied. |
| |
|
 |
"BIRCH 36-A"
Outside Box 20" wide x 8.75" high x 36.0" deep
Inner Drawer 15.5" wide x 6.25" high x 33.5" deep
Weight approx; 58 lbs
Cost $ 303.00
"BIRCH 36-B"
Outside Box 20" wide x 12.0" high x 36.0" deep
Inner Drawer 15.5" wide x 9.5" high x 33.5" deep
Weight approx; 68 lbs
Cost $ 320.00
Flat packed for shipping, assembly required.
Fitment hardware supplied. |
| |
|
| Custom Vehicle Specific Drawers |
|
AT is developing vehicle specific drawer systems. If you don't see your vehicle here call or e mail us. We will be able to make something custom for you.
We do short runs for minimum order of 5 drawers. Cost savings for short runs over custom builds are around 30%, call or e mail for details. |
| |
|
| |
Land Rover D-90 |
|
No finer an Expedition Vehicle than the D-90 to fit a drawer system to. As with many short wheelbased vehicles, storage is at a premium.
The drawer fits right between the wheel wells, providing a lockable drawer, that your gear and camping equipment can be stacked on top of.
An elegant, functional solution to security and storage.
"D-90"
Outside Box 32" wide x 8.75" high x 36.0" deep
Inner Drawer 27.5" wide x 6.25" high x 33.5" deep
Made from Composite this drawer Weighs approx; 48 lbs
Custom Build Cost $788.00
|
| |
|
| |
Jeep LJ |
 |
We have also done some custom drawers for LJ's. The pictures show a white LJ with a drawer fitting right in between the wheel wells and under the door latch.
It has Versitrack and adjustable position loops, and a fridge mounted on the top of it. |
| |
|
 |
|
| |
|
 |
The gray LJ has a higher drawer with the top extended over the top of the wheel wells providing more storage both inside and on top of the unit. It also has the Versitrack system mounted onto the top of the lid. |
| |
|
| |
Drawer System Accessories: |
 |
Fridge slide; Use the same heavy duty slide we utilize in our rugged trailers. Fits the Engel 35 and 45 fridges.
Cost: $249.00
|
| |
|
 |
Aircraft Grade Adjustable Track; Need to stow more gear securely? We can fit a track system to the outside of the drawer box so you can strap all of you extras in place.
VT-24. Versitrack system for the top of a 24" deep box.
Consists of:
Two 24" lengths of Versitrack
Four load rings
Mounting Hardware
Cost: $72.00
VT-36. Versitrack system for the top of a 36" deep box.
Consists of:
Two 36" lengths of Versitrack
Four load rings
Mounting Hardware
Cost: $93.00 |
| |
|
 |
|
| 80 Series with two 36-A Drawers. |
80 Series, two 36-A drawers, and fridge. |
